Selling my machine:
https://www.irsauctions.com/lots/?pg=details&id=22902
Type: Posts; User: nat_wheatley
Selling my machine:
https://www.irsauctions.com/lots/?pg=details&id=22902
Cutting 4'x8' sheets into closet organizer parts.
Right now I have 4 of the LH vac motors mounted directly to the underside of my table. I'm thinking about boxing out the back corner of my shop (about 20-25' from the machine, maybe 1 bend..) and...
I'd be interested in what you come up for this. I'm on the verge of doing the same for my hold down vacuums.
I bought my PRS Alpha 60x96 10 years ago. I can't express the amount of time, effort and work that's been needed to get my machine up to the point where it was able to cut satisfactorily and...
Thanks Brady!
Thanks. The supply house is actually closer to me than HD, so that might be the better route anyways...
Thinking this might be what I'm after:
...
Hadn't seen one that didn't have a plastic coating, but will do search now...
+1 to this ^
I have a solid copper wire that runs from the main trunk of my dust collection ductwork down a flexible hose to the dust boot on my machine. Issue is that, over time, and repeated movement, it...
I love seeing your projects come to life. Beautiful work, thanks for posting.
Power went out - mid sheet - then came back on for a second. Cooked Outputs 1-4...
Working as it was originally. Thanks to all for the help.
Brady, thanks very much. I'll check those 2 jumpers Monday am and report back.
I’m not able to adjust my RPMs now, until the spindle is actually cutting, which isn’t logical.
Thank you, I’ll take a look at the board and see if I can find the jumper.
2008 PRS Alpha 60x96 HSD Spindle
I just replaced the control board in my machine. The VFD now turns on only when Outputs 1 and 4 are on. VFD (Yakasawa) used to turn on when I turned on my...
Looks good, nice to see the machine moving like that. I had a job a few years back cutting cabinet parts (same cabinet over an over) out of 500+ sheets of 3/4"MDF. Toward the end I was cutting at...
I used hard felt, pushed against the rail, and it works well. It was Gary Campbell's idea. Reply#7 on this post shows how mine is attached:
...
My original spindle is sitting on a shelf as proof that the warm up makes a difference. It lasted about 2 years with no warm up routine, while it's replacement (always warmed up) is going on 8 years...
Andrew, thanks very much.
Andrew,
Do you know what pricing is like for the Cabineo fittings?
Looks great. I'm always impressed with your work, thanks for posting.
If you'll be marketing the software toward professional shops, you'll need to offer construction methods comparable to what they're already using.