Search:

Ron
I found it useful to get to know the installer for a local granite/marble shop. I have the corian from a couple of kitchen where they upgraded.

Doug

I would like to thank Doc Palumbo, Ted Hall, Ryan Patterson, and Barry Boyd for all of their efforts put into the Queen Creek Camp Shopbot. Especially for the use of Barry's shop and machine. Much...

Count me in too!

Doug Berk

Jack

There is a product at Lowes called Grab It and it is made by Locktite. It is similar to a white caulking/silicone. Put a continous bead around the outside edge and it forms like a suction...

When you select your cutting tool click on edit and in the top right hand corner there is a space for stepdown.......enter it there.

Jim

Try this site http://www.acrylic-designs.com/clear-image.htm

Doug

M Holm

I have had this same problem many times. What the Bot is actually doing is going back to the last line where it left off and it will go back to that -Z level from the previous line where...

I have recently found a problem that I could use some help with. I have a PRT 120/60 but only have a 96/48 bed on it at this time. I cut a piece of 3/16 polycarbonate that was 48 x 48 and I cut 46...

Pneumatic impact wrench and 1-1/8" socket

That's nice to know Phil! Next question, where is Part Wizard 2 ?

David

You can do the same thing right in PW. You can zoom -in in PW and drag the nodes onto each other to complete the connection in the font.

Mark

I've had this happen to me twice just recently. The first time, it was lack of grease in the drive gears. Observing them very closely when they are dry you will see that the gear teeth...

I am also interested in all of the above points.
I would like to see some of the in/output.

red

I got mine on a lease and it has worked out great. The stickler is that most leasing companies will remit the amount upon your receipt of the product in good condition. Not so with a...

Gerald

Why should that second set of motors and controller cost any more for the upgrade than they do for the Hotbot?

Maybe someone can explain my confusion here. The difference in price from my prt60/120 to the new "Hotbot" is $2000. The upgade is double that????

Well, this is the first week in April and tomorrow is the last day of "that". Presumeably we can expect some "details" to be posted tomorrow!

One solution I have found (been there done that) is to lean on you metal table as you do it presuming that your table is. Just keep yourself grounded while you use the vac.

I cut it with a 1/8 inch HSS single flute bit.
The HSS bit is more flexible (vice the carbide which is more rigid and brittle) and you get less breakage that way. You must also run the router on...

I went to the Porter Cable "Store" in Phoenix to get 1/4 to 1/8 adapters only to be told that they don't carry them. They sent me to "The Shop" (which carries a multitude of tools) and they are...

I am in Phoenix and I will be there!

Bill,

I have a small program on my desktop called
photoresizer that I can e-mail you if you want.

Joe

What font did you use for that Waterford sign?
Did you modify one yourself?
E-mail me pappy@mindless.com
Doug Berk

Todd,

Click on (V)aules and then on (N) and change
the setting for it!

Don,

Mine did the same thing.
Click on (V)alues and then (N)
Change the setting for input 4 and hit enter.
This should help it.

Doug