Search:

All the items are sold.

I was thinking $100 for the controllers with enclosure and $50 for the boards.

Sorry for the long wait. I thought that I would receive a notification.

I have a few boards and two complete controllers in enclosures. I know that the one that the V3.30 with enclosure and cables works. I never used the other ones, so I don't know if they work.

Let...

Good idea. Thanks

Is the HSD spindle fan connected separately to the controller and not through a VFD? If so, is the fan running constantly as the controller is turned on?

I have an older PRT and I am interested in getting some newer motors. Any suggestions to which Vexta motors to look for?

I have PartWorks 3.5 and I need to be able to use a different Post Processor than SBP. Is there a way to install different PPs without having to pay $500 to upgrade to Vcarve pro?

Thanks for sharing! I just checked the price for a package we usually ship and the savings were quite a bit.

I am making some double-sided parts where I have a jig that holds the parts for cutting the 2nd side.

When the cuts have been made the machine returns to 0.0 as it should, but it is in the way...

I cut a lot of HDPE Starboard parts and it is a bit random which parts that cup/bend or warp. I try to store the parts on a flat surface and assemble them as quickly as possible. Some larger pocketed...

Is there a way to do something similar to a 2 rail sweep in PartWorks 3.5? I am trying to make a 1x3 ft. rectangular part that has to have a specific rounded edge. I can set it up in Aspire, but I...

I uninstalled Shopbot 3. When I installed it again (same version 3.4.27PRT), I got the option to update to a new Zzero.sbp program. I remember, that I did that the first time, without thinking more...

Ron - Yep, I am sure that the zero routine is the problem. I have not tried to edit. I am not sure where to start. I see it says raise to safe height, but there is no value. I guess, that it is a...

yes, it does say 0.121" for a brief moment as it touches the plate and then the number goes to 1", but Z does not move up.

I zeroed to the table with the plate. After it was done, the bit was as usual just a little over the plate, just enough to pull it out, so about 0.121"/0.122" above the table. The position window...

I took a look at the settings and they looked right. No misplaced decimals.

I also tried to set (z)ero to the table in PartWorks for the part. When I did the actual zeroing to the table it was too...

Thanks for those suggestions! I will try them out.

It retracted slightly. Just enough to freely remove the zero plate. I zero on top of the material.

The problem is that if I leave it at 1" when I start to cut, it plunges way too deep and into the table. The only way I can get it close to cut how it should is to manually zero Z after it has zeroed...

When I zero Z, it displays 1" in the position window, when it is done touching the zeroing plate. How do I change the setting, so I get an actual 0"?

Frank from Shopbot suggested that I had the wrong version of the software installed. My machine should use version 3.4.27. I reinstalled it on the new PC and it worked.

So it is not the Serial to...

ok, I got the machine running. At least I can get it to jog around, haven't tried to cut yet.

I found an old PC with a serial port and it hooked right up. I am suspecting that the Serial to USB...

Thanks for your help.

I tried the VI command and it looks right. Also tried all the ports, but same result. I might have missed it, but I don't seem to be able to find help in the manuals other...

Hi! This is my first post here and I hope someone will be able to help me.

I bought an old PRT standard with a PC. It was working fine when it was demonstrated. Nothing except the connection to...