I need some help with feed,speed and cut depth in hardwood for an onsrude half inch ballnose 2flute upcut.
It has been a while since adding a toool and I cannot find anything or rememeber how to?...
Type: Posts; User: JimFabLabFulton
I need some help with feed,speed and cut depth in hardwood for an onsrude half inch ballnose 2flute upcut.
It has been a while since adding a toool and I cannot find anything or rememeber how to?...
I am working on a 3d model in aspire and when I merge two items I am have a problem with the second item keeping the first items curvature from a 2 rail sweep.
I am trying to put a base on soccer...
Quick follow up.
Okay a onsrud 60-124 3/8 double flute compression on cherry, birch prefinished plywood .72 inches thick
14k at 400 ipm .5 in first pass cuts very well, nice clean edges that...
any advice from your experience?
Thank you for the tips, it sounds like I need to bump up the feed rates
if I run 10 ips at 17000 that gives me a chip load of .017
so I think I will start there
okay i just got some onsrud 60-124 3/8 double flute compressions
my plan is to try 3 ips @ 15000 ( chip load .006 suggested chip load between 0.16 - 0.180) first cut 2 passes ...
I just cannot imagine why a shop teacher would buy such a piece of wood, it came from a hardwood company and still has the tag.
I am the teacher. We really just got going in november, but I have learned a ton.
I discovered a solid piece of mahogany 6in x 10 in x 5 feet that was purchased by the former shop teacher. I am not sure what to do with this??
Any ideas.
This is a fire place mantel I made for our new home we are building. Now all we need is to finish the home. The wood is walnut from our farm. I took logs to a Mennonite mill and once they got to 700...
Okay, I have tried many different cuts with the standard up and down cut bits like the ONSRUD 57-910 running at 14000 rpm and 3 ips.
I am running a prs alpha with a 5hp columbo spindle. Cutting...
Does anyone use aspire? Looking at it for a new class next year focusing on cnc work.
Hi,
I am looking for solid surface countertop material similar to corian. i have found
http://solidsurface.com/ as one source, but know that there has to be more out there. Any help?
anyone have any lessons or plans they would be willing to share. we have had our 4896alpha for a few months, have done sign projects, starting a chair project suggested by TJ. I am looking for more...
Can anyone help me find who made this or and Ideas for a project like this. I heard that this might have beed made out of all wood and would like to see what it looks like.
...
Anyone around the COMO area? I have a new 4896 alpha and just starting to learn , could use some help.
Thank you Brady,
I chucked up a dial gauge and rotated it in a 8 inch or so circle and found I was off around .07". After some loosing and tighting of spindle it is much closer .02 or so, I am...
I need help on how to square the z axiz. We have a prs alpha 4896 Electricty just hooked up first surfacing pass complete and I have some obvious tooling marks, so I know my z axis is not square....