Search:

Hey Eric

watched some of your videos and you have done some really cool mods to your shopbot. You may have already done this, but if not - any chance you could put together a step by step...

brand new to fusion and have a shopbot. pretty clueless on how to get them working together and seems every video i have seen is some 5+ years old so the interface doesnt match what i currently have...

Awesome ! Thanks!

Thanks much for the response! care to share what number that endmill is?

could anyone share their thoughts on speeds/feeds and bit stickout when cutting deep cuts.

I have a hypothetical situation where i am trying to understand how one would cut a reverse mold (in...

happened to skim through this thread and thought i would share my setup and what a good friend of mine and i did to achieve around .003 on my table. I havent checked it in awhile but i typically need...

i converted mine to e-chain also. for my trough i used cheap plastic gutter from menards - works excellent

TS75 is a beast of a saw! im sure you will be happy with it and if you got a festool dust extractor also i yhink you will be extremely pleased. One other saw i forgot about sinve i dont own it but...

Well finally got this figured out with much help from Shopbot support.


As it turns out, this shopbot was originally ordered to have a spindle and a router. Because of this when running a...

Thanks guys, i will certainly check those out. only reason i asked abut retrofitting sb software is because i watched a video once of cabinet company where they said they worked with shopbot to...

ok so im up at 3am this morning watching the video on vcarve pro moulding oolpath so i thought i would give it a go.. so to test i drew up a simple concave design, followed the video and told it in...

i also have the festool TS55REQ . fantastic saw - Highly recommend it

is it possible to use shopbot control software with a different brand cnc (gryphon)? i know someone who just aquired one of these machines and would like to assist them - it currently uses mach3 and...