Search:

I can second the issue.

I’m getting exactly the same thing trying to run a J-tech laser module on my Buddy 48. I’ve come to the conclusion that the ‘Spindle start’ prompt is built into the core...

So I purchased the laser pointer from the Shopbot store. I found a way to mount it on my Buddy Alpha 48. I have power to it and I successfully ran the calibration file and recorded the off-set.
...

After spending time messing with different config files and talking with a couple of the Shopbot folks at the San Diego show, I’ve come to the conclusion that the ‘Spindle start’ message is built-in...

I've mounted a J-Tech laser on my BuddyAlpha and I need some programming tips. I'm getting delays between when the laser turns on at the start of the file and when the movement actually starts....

Does anyone know what causes the "Run Time error 13 Type Mismatch" to occur? I've had to go into regedit 3 or 4 times now to delete the Spindle Control folder, to clear it up.

OK, so the issue was I had moved the Indexer from axis "B" to "A", which the software didn't like, because "A" is reserved for the second spindle "head", whether you have one or not. Thus, the "Unit...

I've tried different files with the same results. I'm thinking is has to do with the fact that I had the Tech move the Indexer to channel "A" from "B" when the machine was first set-up. And some...

Can someone explain the meaning for the following error message?
"Unit Values for Z and A are not the same!" and then it exits the Cut file.
I'm new to the Shopbot World, so the interface is still...