Search:

I have a PRS 48 x 96 x 6 setup. Currently I machine a 4" piece of foam with a 4" long tool. Sitting 1" up from material at home, I have 1/2" of Z travel before I hit the stop.
If I buy the 12" Z...

Has anybody tried to copy and repeat harbersales wood grain CNC texture?

Thanks Guys...I have Aspire but was looking for a way to lift the cutter in the corners to square the outside edge. This way would be much easier then 3D machining the corner.

I need to rout a box inside a raised panel door with a 120 deg V bit. The inside corners are square but the outside corners have a radius from the diameter of the tool. What is the trick to...

Thanks Guys

Does anybody have the V1 to V2 Aspire Download? I recently tried to install the V2.5 download on a computer I rebuild. Installed Aspire then the V2.5 download...but found I was still running V1. ...

I know there are alot of guys that have bots as hobbiests but how many actually make a proessional living with actual profits.

I tried selling 3D capabilities to local wood and sign...

Hey Guys, Just wanted to get some feedback on my pricing structure. I've been doing alot of fluted moldings for local builders. I've priced 5/8" flutes @ .25 per lin ft, which comes out to be $1 a...

Hi Gents
What tooling would provide the cleanest cut edge with gatorfoam 3/16" thick. Straight or sprial?
Thanks and Go Phillies

O...OK
What format do I want my customer to export...DXF?

I'm in need of someone who has Corel draw or equal to re-export this file as EPS so I can import correctly in Aspire. I get a message of only bitmap data.

I can email the file.

Thanks in...

Glen, Thanks for the tips on feeds and speeds.

What tooling whould I need to cut .250" Acrylic Sheets.

Thanks

Hi Bill,
Thanks...
I know them guys and also Pioneer Supply sells it...but I'm getting alittle extra for starting it tomorrow if possible, plus I'm trying to get out of buying a full sheet. If...

Good...pal...thanks...I'm there...its hockey time right..eh

I have a rush job. I would like to buy a piece of Komacel PVC 33" x 48" 25mm thick.

Anybody near Southern PA, NJ, DEL???

I'll pick up in AM.

Thanks

I have a rush job. I would like to buy a piece of Komacel PVC 33" x 48" 25mm thick.

Anybody near Southern PA, NJ, DEL???

I'll pick up in AM.

Thanks

I just want to put my 2 cents into the thread on positive comments about the PRS standards.

I've started a 3D custom carving and sign making shop. I have a 9648 PRS Standard w/ 2.2 spindle.
I...

I did use Aspire to smooth the Z textures but there still seems to be points where the XY speed slows down to my ramp values and mytextured Z height was a change of .050".

I have a PRS standard...

I'm starting to do some 3D signage where I'm creating a 3D model from a bitmap.
Typical machining area is 32" x 32" with a depth of around .250"
Material is PVC.
Since I'm not fully sure how...

Hi Scott. That was the problem. X was on 3 and Y was on 2. I labeled it...but before my morning coffee.
Thanks
Nick

Hi Dana..
Limits are on...
Any other ideas?
Thanks

Hi Guys,
I have disassembled and reassembled my PRS Standard.
During re-testing I've noticed my homing doesn't see my prox switches.
If I use the keypad and run into a prox switch, it stops...

Excellent post. I love the technical aspect of cutting technology.

More often than not I am getting some tear out while V carving acute angles on 1" tall Century fonts using a 1/2" 60 deg cutter pm maple boards.
Speeds are .8 for xy and 1 for Z?

Are their key...