Well final report! Its working great now... The problem ended up being the multiplier under unit values. I dont have Alpha motors and the number 4 that is illustrated above was the culprit. I...
Type: Posts; User: lleyens
Well final report! Its working great now... The problem ended up being the multiplier under unit values. I dont have Alpha motors and the number 4 that is illustrated above was the culprit. I...
Thanks! I will re run it tomorrow morning and see what happens! Ya'll have been great help!!!! I feel like I just met a whole bunch of new friends. I hope I can return the favor one day... Ill...
See if this file copies...
Code (part 1)
leyens.txt (24.0 k)
Code (part 2)
leyens2.txt (27.3 k)
Hey, sorry about the delay, meeting was tough.... My jog speed is 12.5 for x/y and 3 for z
Got figure out how to capture code and zip to upload, my next task tonight! Thanks
Ok thanks! Got a meeting but as soon as Im done I will copy and zip file. Will try the alpha number change too... thought this only applied to units with alpha motors... Laurence
The actual cut area is roughly 11.5 inches by 7 5/8 inches the preview screen in vcarve shows it at 13 by 1 3/4
Here are some photos.... Ill make some simple files and cut and measure and photo next...
4214
4215
4216
Ill try! about two hours from now Thanks!
Thank you for the responses last night I wasn't expecting that! My gantry moves very accurately, my unit values for x and Y are 25xx.xxxx and my z axis is 40xx.xxxx I am using the original Vectra...
Hello, I need mental help now... Background info. I have an old pr96 that I bought from a friend that had been abandonded for quite a while. I have spent the better part of a month rebuilding it...