Search:

I have a brand new never installed Becker Vacuum. Looking for best offer. Must pick up in Metro Detroit Michigan

Specifications & Features


Maximum vacuum: 24” Hg.
Capacity: 174 SCFM open...

I purchased a new shop bot in a crate from a company going out of business. I have the build sheet for the machine. I have a new shop built in my garage an have 2 220 lines installed for the...

yes it’s available I am in Macomb Twp 48044.

cliff
596-306-2524

https://www.facebook.com/marketplace/item/1128613387950539/

looking for a indexer for a standard shopbot buddy. Not going to use a lot so I would like a used one.

I have a complete controller box with a new main board. Shopbot Controls PRT V4.17 P.N 001740 PRS-S 073008 1156. It will come with cables and 3 spare stepper drivers. Please make offer.

thank you..

I was removing the Gecko Driver and seeing if the issue was the board or the driver. I discovered it was the driver but I lost the resiter that goes between pin 11 and 12. Does anyone have the part...

I have a shop bot buddy and I have been running this profile for well over a year and today my machine is losing its home position. I have it set to the center it moved to the right. I have tried...

I have had this problem a lot and Shop bot has sold me 2 Geko drives and the problem still happens. During a carve the table will loose connection and will no longer move by the machine. I can push...

I need to carve the following tree scene and can not seem to locate one similar. Any help would be appreciated.

This started happening all of sudden. My shopbot buddy tables is losing connection and moving freely. The router head will move left and right. There is nothing wrong with the table. when i...

When the control box in on. I can't move the table. When I start a carve it will work and then becomes disengaged. I have ruined $200 worth of material today. It is very unreliable.

I have a shop bot buddy, and the table becomes disengaged during a cut. so the router goes left and right and the table stays in the same spot. It does it every so often. If I unplug the controller...

I am having a software issue. I had a computer issue and I have re-installed SB3.6.46. I updated the firmware. The problem I am having is the Inp number 2 is yellow and number 3 is yellow with a...

I am having a software issue. I had a computer issue and I have re-installed SB3.6.46. I updated the firmware. The problem I am having is the Inp number 2 is yellow and number 3 is yellow with a...

I am making a sign and I have a shopbot Buddy 32. The sign is suppose to be 1/4 deep but the left side is maybe an 1/8 and the right is too deep. I have leveled the table and I have checked my...

Thank you everyone. I appreciate the advice very much.

I have a buddy 32 standard and wondering if i can carve in paver stones. If i can what kind of end mill would I use.

I have a Buddy 32 and the x & y stopped moving and I can only move the z axis up and down. It was working and stopped in the middle of a carve. any suggestions?

Can you please send me the files? cwfreitas@sbcglobal.net

What kind of wood did you use?