https://m.media-amazon.com/images/I/61Us1XOkf-L._AC_UL320_.jpgalso get one like this to make a closed cooling system
Type: Posts; User: taylor
https://m.media-amazon.com/images/I/61Us1XOkf-L._AC_UL320_.jpgalso get one like this to make a closed cooling system
if and when you change over to the water cooled spindle, be careful and keep telling your self to check to see if the spindle is running, before reaching in to change the bit. you will be amazed...
from what i remember the z height is about 7 inches.
Hoping for some input, are the parts and pieces worth more separate?
What is this worth?
small cnc built with all shopbot parts
dell computer to run system
linear rail on all axis
prs-s control box
porter cable router
Emergency Stop
Z-zero Touch-Off Plate...
i sent you a private message
thanks
mark
mount a small hinge where it broke. i did that years ago and still working
you have mail
i have a prs alpha control system with a spindle. i have been using this set up for over the past 3-4 years. with no problems and working great. no problems of any kinds.
then today false...
call me 757 288-6256 i can walk you thru everything
3/4 mdf
1/8 bit .15 depth
the other two bits .375 deep
the offsets for
1/8 bit to bit 5610 is .39 inches
the offset for
easy to do , these were done in part wizard, and part works
3 bits whiteside bit#5610, 5710, and 1/8 radius end mill to make the corners look square.
let me know if i can help you on...
hey Dan
I have a water cooled auto tool changer, if you like call me, maybe I can help a little on the water cooled part. The spindle has been on my machine for about 2 years, love it.
mark...
here is a simple design with everything being azek. except for the post which are vinyl over treated wood. the one inch thick azek worked great for this deck
I am planning on be there.
thanks for setting this up
mark
a simple idea that won't break the bank. use two pieces of angle iron 1 by 4 or something that will not sag in the middle over the 16 ft span. make a plate to mount on the skill saw. use the...
until you get the e chain, put a small hinge where the break is . I ran mine that way for several years.
we have always used a full length piano hinges. we have always been afraid that the butt hinge screws holding power in the pvc could not hold weight of the pvc door . We did once use hinges with...
http://motadistribution.com/ac-motors---gearmotors-gearheads.html
found this site, not sure if these could help
good luck
mark
lorin,
I put a water cooled china made spindle on about a year ago, no regrets. I used a delta VFD so that I could use the speed control. Do some research on the spindle and the bearings it...
the one i use were about 3/4 inch deep, they have fiberglass insulation with a white gloss paper material on one side, each tile weighs about one pound or less, they have been on the doors for 17...
drop ceiling tiles 2 by 4 work great. also they are already white on one side and easy to clean
count me in, and call me if you need any help. only 10 miles away.
how about using the shopbot to make dimples in the aluminum where the holes need to be and then drill them out with a drill press.
I everyone, just giving an update on the spindle. No regrets, it is working great. We made a short video making a small 10" by 14" raised panel mdf door. It had 5 bit changes and took less than 4...
Anyone wishing to upgrade to a spindle and not sure of the dollars to do so, here is a lower cost way of getting a spindle. I decided to take the chance 3 months ago with a 3.3 hp water cooled...