Search:

I purchased a PRT Alpha 96x48 back in 2005 and one of my drivers just died and I'm in search of a replacement driver.

Thanks Joe for the offer, I'm going to order a couple of those small round over bits to play around with. The scroll part of the crest is made from only 3mm thick Sintra and I think it won't have the...

Thanks Joe for the choice on the Sculpt Nouveau.

I was thinking of using a Point Cutting or Plunge Point Round Over bit to get the 3D look. Or maybe trying the 1/8" Shank Round Over bit.
...

Good work on the shield Joe. I've been wanting to try that Sculpt Nouveau for some time. I've made a couple of Greek crests, but I only cut out the individual pieces and layer them on so I don't have...

Thanks Paul, I'm always looking for material like MDF that cuts clean with little or no fuzz. No MDF odor smell is also a plus. I'll see if I can get some of that MDF and give if a try. Thanks again.

Paul, was this the Premier MDF, Premier Plus, or the Premier Lite.

Robert

There is a company in VA. called Interlam and they sell a colored MDF by the name of Valchromat. They sell 19mm and 8mm in different colors.

Dale,

I used lacquer in the carved letters with some retarder to slow down the drying time because of the high humidity this time of the year in the northeast. I gave it about 30 minutes before...

Mike,

Thanks, I'll try the shellac and maybe a different paint like acrylic enamel. The mask is worthless if you have to clean up the residue.

Dale,

Thanks for the steps in using the mask. I had a big problem when I removed the mask today for the first time. Most of the adhesive stuck to the finished coat. I used lacquer and wonder if...