Search:

You need to match your xyz speeds, your cnc can only go as fast as your slowest speed when moving in multiple axis. Learned from GCNC

I had an odd thing kind of like this a while back when one day our Desktop thought it was a PRS alpha and keep telling me to push the reset button (there is no reset button on a desktop). So, the...

What I need is an automatic profile toolpath detection where the vacuum pods are and have the tool tab over it when passing thru it.
I may be missing something but isn't it the point of having a...

Hey, Scott nice logo.

Thank you sir

Is there a how to on this project somewhere?

Nice, we have made hundreds of that chair at school it is a fun project.

I would say you could not cut all the way through the leg, that said if it is a really complex taper (straight/simple you should us a table saw or bandsaw) and you really wanted to use a cnc you...

Talk about a rabbit hole...

How did you get your offset? Did you go through the setup routine or just add it in my variables?

Desktop... that is still a little off.
Try a down cut 1/4" 2ips (180 ipm) @ 12000 rmps 3 or 4 passes. (This is what we use on our desktop)

Not to get off topic but what cnc are you running because you numbers sound way off.
We run cheap cmt 1/4" downcuts (kids brake them to often to buy anything better) @ 4 ips with 2 passes 12000...

What is your hold down method? Sounds like your material is moving up and down.

Price is "negotiable"

Desktop dust boot extension.
I finally got sick of the mess long bits made at the desktop.
I cut some .125 mdf on the laser and glued them up.

If anyone wants the file just pm me and I will send...

You need to turn off shopbot easy

Looks like you boards are a bit wide for glue-ups, that said here are few tips. (that you may already know)

How are you milling your lumber?
To mill your boards:
1. Cut to rough LxW (final size...

Thanks to all,
As for Corian... it is but only for people in the community education classes I teach.
Classes are free and corian cheap.

It was a fun little project, I made it quick during my prep so skimped on the sanding, but it still looks nice.

Here are some picutes...

I switched over from Creo 3.0 to Inverter 2015 (to match Project Lead the Way at our high school) and thought this would be a fun project to go to PC to real life.
I modeled a Lego mini x-way and...

Just a few pointers:
1) The is no need to run a clearing pass for foam.
2) The x,y, and z must be set at the same speed or the you will be cutting at the slowest of them all. So while you think you...

Have one good shop helper per class and have them do it.:)

Make a box to fit the vac tops and pipe them from there (2" pvc).
One of ours had a meltdown so I cut it up and just dropped the motor in.
32463

Had to ask, you look shorter sitting on your bike.