Okay, so the other day as the ShotBot was working, I heard this unusual sound, a low loud humm, like a car engine idling. I then noticed the wheel on my right, nearest to me was not turning or even...
Type: Posts; User: aliciaj
Okay, so the other day as the ShotBot was working, I heard this unusual sound, a low loud humm, like a car engine idling. I then noticed the wheel on my right, nearest to me was not turning or even...
Oaky I bought a new USB Cable, uninstalled and reinstalled the program. Nuttin working. I still get the Can't Connect to Ports. And as the computer reads,,, Ports are working properly.
Oh, I may also have that problem Where did you buy the replacement cable at?
So I'm getting the Can't find Port Can't Connect to Port etc. Yet all Ports are working properly. The ShopBot tower red light is Blinking suddenly. It's from 2007. I've had this happen before , Bbut...
Gosh, I'm gonna un-install everything and reinstall everything, but use a different USB connection. I know how to use the machine, I just don't know how it works inside of the machine. Think Oddball...
Okay, so my old computer died. Bought a new refurbused one with Windows 10. Did the online upgrade for the ShopBot software. All went well until I tried to cut a test circle. At first it wouldn't...
I have about 15 4x8 ACM (Like DiBond) boards. All big shapes. I am using a straight 1/4in bit. Is it okay to make all of the cuts in one pass? Or, should I cut them in two passes?
So do I use the "Pocket Toolpath"? I have had my ShopBot for a few years now. mostly cutting simple shapes and letters. But I am going to start doing more work that reguires everything to be perfect....
Good Day, I need to make sure my spoil board is perfectly level. I have the big spoil board cutter bit. Do I select the 96x48 board and tell he Shopbot to cut it down, say at 1/2in. all around?
This is what I'm getting from my computor,,,,http://i132.photobucket.com/albums/q14/Trklady/ShotBotFileErrormessage.jpg
Okay, I went back. I put the metal plate under the router bit and the little clamp on the router bit holder "Culet". Did the test and it still cut wrong. I did get this little asterick reading "set...
Hello, so I am finally able to play with my ShopBot again. I design the job in PartWorks, review the preview, looks good. Bring it into the ShopBot3 program. I do the zeroing plate thing. Everything...
Howdy, The red on/off button on the ShopBot computor tower doesn't seem to work. It won't stay on. It worked okay last week, now it don't work. The conections on the outside are all conected. Where...
12609 Here's a pic. It starts in the red dot area. I want it to start in the blue dot area.
Okay, I've had my ShopBot for abut a year now. Although I've cut a few things on it, I can't seem to figure out how to tell the machine to please start at the furthest right hand corner. It always...