I have a 4x8 PRS Standard, 2007 3Hp spindle.
Planned to use the 4x8 in retirement and sell a 5x12, but the 5x12 is the production and I need the room so the 4x8 has to go.
I am 30 minutes west of...
Type: Posts; User: Kworks
I have a 4x8 PRS Standard, 2007 3Hp spindle.
Planned to use the 4x8 in retirement and sell a 5x12, but the 5x12 is the production and I need the room so the 4x8 has to go.
I am 30 minutes west of...
I was cutting a triangle out of 1/4" UHMW, at the corner of the long leg and the hypotenous, the up cut bit caused the material to lift and it caught in the dust boot. As the machine moved forward it...
Any idea when the website will be up to register for the Columbus Ohio Seminar?
I have a PRT Alpha you might be interested in. Contact me and I can send you pictures.[/QUOTE]
Do you still have a 5x10 PRT? I have been cutting 4x8 material and my customer now has the need for a...
I will be going down on the 18th from the Cincinnati area. Anyone looking to share a ride/hotel?
I am cutting 1/4" UHMW, the cut has a 200" perimeter. There are 20 indentations for indexing folds. The indentations are 1/4" deep and made with a 1/4" bit. My problem is I have 8 start points. All...
Thanks Dave, I reworked all toolpaths with new Home and Start points. This will save hours.
I will be cutting multiple sheets of UHMW. I would like to move the starting point of the cut from the lower left corner to the upper right corner, then move the x,y over 10 inches, remove the cut...
Joe:
I like the spacing between the A, C and E better in the wood but the spacing around the letters to the frame on the left and right should be closer to the spacing on the top and bottom. Is that...
I am planning on getting there Thursday night. Anyone interested in sharing a cabin?
I will driving from Aurora, Indiana (a little west of Cincinnati) on the 14th to the Aspire Camp @ Mcgrews. Anyone want to share the ride?
Thanks Jerry
Fix took 3 minutes.
Kenn
I have a 2007 PRS Standard. My computer got hit had with a bug after down loading a 'free' file from California Fonts. Had to take it to IT for the fix. Had to reload the Controller Software went...
Finished the 3DSign Camp last weekend, what a great time.
I did the 5 day. Started with Rob Jones and Gary Johnson...seeing and doing, cement tree, Peachtree monument, adhesives and reactive paints....
Its on the calender. I'll be there.
Just looked up Maker Works, a cot and a hot plate and I won't want to leave.
Set the date and let me know.
Neil: I surfaced a 4' dia. cherry table top today. I attached the top to a 4x4 sheet of melamean(sp). The top was set back about 8" from the front of the shopbot to give room to run the bit past the...