Search:

Yeah... Im still on Part Wizard. I was thinking about the 30 but I just wasnt sure. The tool is pretty cheap so I dont think I have to much to worry about. Thanks

I do not do much lettering but I have a job that needs some small v-carved letters. The letters need to be around .125 tall and do not have to be painted. This is the tool I was looking at. I just...

Thanks Jim,

Im just using Times Roman. Like I said, I dont do alot of signs so I appreciate the advice.

Brian

Im just running it through PartWizard. I dont have either one of those programs since 99% of my work is flat work.

I dont do alot of v carving so help me out here. I have sets letters in Time Roman which are 2.0" , 1.062" , and 2.5" in height. What degree and diameter bit would work for all 3?

I dont make signs normally but I have one I need to make so I need some help. Its going to be pretty simple and just V Carved. Is there a good way to mask the sign to paint the lettering? Im assuming...

PDS is just up the street from my shop.... That makes it nice anytime I need a collet or anything for my spindle

I was having the same trouble in the beginning with our BOT. We have a 2 spindle standard and therefor... no heat sink. The second spindle doesnt get used as much and when thoses driver are in idle...

Well a good thing to keep in mind when tring to bump up speeds and feeds in the method in which you are holding you parts. I have a PRS 60"x96" with 6 zones and I stay around 3.00 - 3.80 IPS @ 13000...

I am looking for a simple cost effective way of keeping orders in line with our build schedule. I have looked at a few pieces of software... But I dont know much about this side of a shop. I have...

After all the trougle I had with Bobcad. I took some time off from the search for a good solid modeling program, but I have been looking at a Rhino bundle from Mecsoft recently. I would just like...

Well..... I had a REALLY bad time with this company. Their sales office is far more compitant than their tech support. After a total of 6 months of unanswered phone calls and a COMPLETELY unuseable...

Well Nick... I might suggest finding a builder and offer fluted panels and mantels. Alot of cabinet shops dont like making them because of all the setups. I have a friend that makes them with routers...

Well for a start.... Do a little of all of it. Then move on with the on that works the best. See what you like the best. You would be suprised at the contacts you can make by having an open business...

I can use some of the other software but I can control the tool paths alot more with Bobcad. I also need to be able to create and edit solids. I know this is like stepping into a bear trap but I need...

Bill.... Are you you having any luck?


Brian

That must have been before me.... I just want them to make good on their promises. I have ABSOLUTLELY NO intentions of stirring trouble. In thier camp or this one.

Brian

Yep... Thats pretty much everything I picked out. Im tring to work all this out with them..... Since they refused to take it on a return I have no choice but to stay on them until it works properly.

heres just the begining of a planer rastor contour... I have gone though it. See what you guys pick out as a problem.

thanks
Tree


'PROGRAM NUMBER :100
'PROGRAM NAME:...

Hey Bill... any luck? They are supposed to be writing a post for a standard. I have sent them the information and since my machine has two heas I sent them the info on that.... dont know how thats...

Oh yeah.... I have a standard and the Post is for an Alpha. Where do I go to get the info they need to create the Post.

Brian

first off..... Good luck on the tech support. Im still waiting on them to call me back from 2 month ago. I gave up.

And second the only reason I still have the software is that they without any...

I have had a VERY bad time with version 22. I purchased it and was told that it would work on my Bot. Well after Tech support would not call me back, talked to me like I was a fool, and could not...

Im not in the sign business so could anyone help me out?... I have one of my clients wanting an Ohio State logo. Any of you vector art guys have a good place to get one you could tell me about?

I am slowly working mine in more and more. I use mine as a second tool. All I do is create a file with the head 2 post and make it a custom cut file and where I want it to come up in the file I just...