Hey All... Long time no see.. Well were back and once the Clifton NJ camp is set, count me in! Bill, looks like you have been busy, hope all is well.
Type: Posts; User: thecustomsignshop
Hey All... Long time no see.. Well were back and once the Clifton NJ camp is set, count me in! Bill, looks like you have been busy, hope all is well.
Wow, what a post. Never read such a long post that amounted to so little usefull information before...
Anyway, politics aside, we are good. We did see a slight drop off, but not a lot. ...
Good News. We got the sign back and when I cut into the blister, the primer was fine, but the paint had an oil film to it where it would bond to the primer.
Turns out we must have spilled oil...
Hey Ernie.
We normally weldup a 1 inch sqr tube frame that has a number of mounting points to support HDU. We have yet to have a failure such as this, but it still could happen. Mother nature...
Hey All. Thanks for the input.
Bill, I will try that thanks, body filler should stick to shellac, correct?... Chat with you soon.
Peter, good idea but the customer is set on the...
Just did some site upgrades, photos.
www.TheCustomSignShop.com
Thanks for the info Joe. It was a solvent based primer. While I'm thinking I will try to avoid using Extira again, the wash down is a good idea.
What I'm looking for is a photo of the failure...
Hey Joe. I did search the forum and unless I missed something, I did not find a photo that matched my issue.
I used a primer sealer that I used many times before. The paint was a BenMoore...
Used Xtera many times, and while I personally do not like the product, I had a piece in the shop so I decided to use it. Primed and painted it as I have done with many other signs. Never had an...
John, did I leave my brief case their? Thanks for hosting a great camp....
I will be there. Bill, please let me know what if anything, you would like me to have ready for this camp when you can. Do you need help on Friday?
Bill, just realized the camp was the day after Halloween, got the whole kid thing happenin and I won't be able to make it..
Sorry about that, my fault, but lets plan another one real soon.
Cool, thanks John.
Hey Steve, yes, but not corrigated. The client spec'ed for a 'green' project, no land fill impact.
I have a request to make displays for a customer out of some type of HD cardboard. Has anyone ever done a project such as this? If so who was the supplier and how thick was the material you used?
Thanks John, let us know.
Any room for RV's? I would like to go.
Thanks all.
Yes, the sign is 12' wide by 5' tall, just the top area alone... (Made on a 4x8 Alpha)
Yes, it is lit from the top. My township does not allow bottom lit signs when the...
That was us, and yes, we were...
Well, it was a projet but it is up. We were delayed by the customer wanting to hold off on the Drive Thru, but we are done!
5815
Cedar - Allwood Industries
Friend cost- 350.00 Plus Materials.
If you need help with finishing, let me know. Cedar can be hard to work with sometimes.
Hi Bill.
Yes, but DW has to be back at work on the 27th when we head down in July. Unfortunatly, we won't have time to make it in July.
Talked with Bill P. Would it be Ok if we planned...
Lacquer Thinner, 60% MAS and 40% Lacquer Thinner.
Works well.
Extreme care and ventilation when spraying LT. We use a spray booth and proper ventalation, highly recomended.
We...
Mid August for me please. I'm in NC on vacation July 16th-26th
Thanks Joe, I'm in the shop late tonight cutting out beer mugs, fun....
I thought others were doing it also, or some variation of this process, but I appreciate the recognition.
Anyway,...