At 0.175 per pass, depending on the specs for the bit, you may only be using the upcut portion of the bit. Forget the spiral ramp and try a smooth ramp of 0.375 - 0.5 at 0.25 - 0.375 per pass with...
Type: Posts; User: srwtlc
At 0.175 per pass, depending on the specs for the bit, you may only be using the upcut portion of the bit. Forget the spiral ramp and try a smooth ramp of 0.375 - 0.5 at 0.25 - 0.375 per pass with...
Kar,
A couple of things you can try with your design/toolpath. At each of those corners, try giving it a slight radius instead of a sharp point and also, under the corners tab in the toolpath...