I am on an Acorn controller and they still use the same green or blue connectors
My guess is it is a bad cable
Type: Posts; User: jerry_stanek
I am on an Acorn controller and they still use the same green or blue connectors
My guess is it is a bad cable
I physiclally move the drives around. I know that is a problem but if you are careful you can pry the drives off their green connectors without removing the board. I have 8 drivers and 4 have the...
It also could be a bad cable
do you know which one it is? you could change it with one of the oyher ones or just change the Z and Y with both X drives.
Did you hook the other motor up to the noisy drive. It may be a loose wire going to the Gecko. Are you getting all green lights on the Geckos and is the resistor hooked up
I always just switch the green and black
That looks like the first one I had. I did upgrade to the 4G and that made it just fly compared to the original controller that would only use 2000 lines of code and then have to reload the next...
I think they would repair it if you sent it in but like Ken said there is something else wrong
You can use any one but make sure you use the old resister. What is the problem it may just be the little green fuse is blown. Gecko will send you them for free or you can call Gecko and get a...
I have been running an HP Elitedesk 600 on mine. Micro Center had it for $99 when I bought it refurbished I also have a roll up keyboard that is dust proof
Why would I want to do that. If something is working good why try an unknown. I did that with the Shopbot and bought a plug and play unit from Gray and it didn't work. I got blamed that it was my...
The beisse I run has a controller that still uses windows 95 and runs flawlessly
True but it does work
I see that it includes a lot of options that are extra from other companies
Both Packages Include:
Robust Dual Z with 5x4 drill bank
5hp ATC spindle
10 HP Becker blower
4-Zone (for the...
What motors do you have
I bought a PR back in 2007 that I used to get a PRS in 2008 have been running that machine since. It has paid for itself and now just keeps making money. I did try Gary's retrofit upgrade with the...
I'm still trying to use up all the post holes that I got from him RIP Joe
That sounds about right.
A coffee can lid works just as well
Yes they are but it costs as much to replace them as a new spindle. they are not user replaceable
When I bought my new in box 4 year old shopbot with a spindle they told me the spindle may not last long as they should be rotated when stored for a time. The grease settles and dries the bearings...
Make sure your ground is working I was having intermittent problems and it was a bad ground. I grounded it better and now works fine the ground on the inputs was a little iffy
I know the feeling I bought 5 Gallons of gas and went to fill the mower but couldn't find it. Looked all over but it was not there. I went and bought another 5 and came home filled the tank and...
I have had both never going back to a router.
The weird part was it showed as a Alpha and I could not change it. I had to reset every thing