Hey Scott,
Thanks for your input!
I didn't realize that the Spindle Control was a separate exe file. I ran it on our 2nd machine and it adjusted the speed perfectly.
Later, when we have a bit...
Type: Posts; User: Tim Summerer
Hey Scott,
Thanks for your input!
I didn't realize that the Spindle Control was a separate exe file. I ran it on our 2nd machine and it adjusted the speed perfectly.
Later, when we have a bit...
Hey,
I recently installed a 4hp HSD spindle on our PRT Standard machine. We're using the original control box. It is a pre-version 4 board.
This means that I cannot use the newest shopbot...
Hey everyone,
Finally got our problem solved. Here's a list (in order) of all the things we tried. With each change we tested on two separate computers.
-Replaced USB cable (installed old...
Here's an update for the last few days.
I had an electrician come and take a look at things, while he was clear that he was not overly familiar with static electricity as it applies to sensitive...
Brady,
Thank you as well for your thoughts.
I've got one question right off the bat.
Here's a simple layout of our facility This is looking at the machines from eye level. (kinda). You can...
Thanks for taking a look Dana,
First a few notes on the Tests. Woodcut is opposed to Aircut.
We're trying to totally cease production so we didn't run each test exhaustively. The succeed in Test...
Hey,
I know this is a common problem, and I apologize for adding one more post about this, but I need a hand figuring out a lost communication issue.
I have two ShopBot machines. We're using...
Alright, got it figured out.
I guess outputs 1 and 4 have to be on to run the spindle. When I run a sbp file it turns 4 on, and I guess I need my CAM software to turn number 1 on. Apparently...
Hey everyone, finally decided to upgrade to a spindle and it arrived today. Trying to get it up and running. Things are going fairly well, but there is a strange problem and I can't get the Spindle...
Hey Everyone,
I thought I'd share a problem solved story
Recently one of our PRT Standard Shopbots has been getting off in the X axis. The problem has been inconsistent, unrepeatable, and very...
Wow, that is very nice. I've been meaning to make something similar for my Father. Thanks for the post.
wow. approximately how many 4'x8' sheets would it take to make one of the tables?
Well we've been running our router for a day and a half now with no comm errors! Hurray!
A million thanks to Jay Nicolaides for coming out here and pointing me in the right direction
There are...
Well I tried your advice Paul and Brady
- Did a few long air cuts and wiggled the cords - no issues
- Tapped on the box (it's awfully solid, but I tried anyways) - no issues
- Replaced the...
Well, I'm reaching my whits end. We run two shopbots at my shop and one of them is driving me insane.
It keeps losing communication. When I get it back online, the location is off. I know this is...
Check your Value->Ramp settings. We had a similar problem- somehow VR got opened and the values set to their minimums. So every time the machine made a direction change it slowed waaay down. Burned...