trying to figure out which ones hook up to awitch..and where they should lead
Type: Posts; User: Doug Haffner
trying to figure out which ones hook up to awitch..and where they should lead
34718 heres a pic of the inside....
In particular, where the switch hookups go for the switch on front of box.
I need photos please! Reconnecting old motherboard…many wires got disconnected. No photos…dumb on my part.
It’s a usb direct to the board.
I mean even when machine IS turned off
I’ve tried direct to a USB port and to a hub. No luck
Every computer I’ve tried says comm port 3 is not functioning.tried multiple USB ports.
And shows input #4 red even when machine isn’t turned off.
I should explain…powering up the machine…I manually start the spindle and increase power. I’ll try to see if the e-stop is fouled up.
Did a fresh install but no luck. Tried a new cable too… still no success.
I tried blowing out the control box very carefully! No luck
Hello, I was carving early in the week..some max metal aluminum. I finished at set up carve for next day. when I came in, I warmed up machine and started shopbot software. it could not find the...
Thanks! It's carved from HDU...and then painted with a bunch of metal paints. This is one I did for Christmas as part of a steampunk model set I made.
31018
I recently created a set of steampunk 3d models for use in carving and used it on this name plaque for a customer...They are thrilled with it, which makes me happy.
30944309453094630947
Looking to sell one of these...any advice on how much I should ask? I understand they aren't all that common.
I've held onto it for awhile, but figure someone may get better use out of it than it...
My shopbot came with some spare parts....looking to sell this spare Y carriage. I understand they aren't too common.... Not even sure what the going rate for one of these might be....
...
Looking great!
One suggestion: I see lots of people use a font that is a script style and not kern it properly. What is kerning? Take a look at this :
...
http://1.bp.blogspot.com/-BNfqqWwfpCU/UxFHv5aHhkI/AAAAAAAAErc/Cs9nW_BJIsg/s1600/bigjoe.jpg
I was out on the West Coast, tryin' to make a buck
And things didn't work out, I was down on my luck...
Just finished this for a friend who has helped me out...he brought
his tractor and dump truck to my shop for a couple days and moved debris...
...
Nicely done!
One tip I got from a friend who does a great deal of airbrush work is to thin the paint for hand lettering or airbrush....
instead of water you can use clear acrylic. "Future" used to be the brand...
Finally!
Success.
Switching to a different driver solved the issue. I suppose I'm going to have to seriously consider an upgrade from the old board/computer next year.
Thanks so very much to...
Well dang.
I thought it was cleared up, but after an hour long carve in some pvc, it was about 1/4" higher at the end and the carve was clearly off. Crud. Is it possible the driver may be going...
Thanks!
So far, so good. I cleaned the Z rack and pinion with acetone, then re-coated with white lithium....messy job for sure.
At the moment, it seems to be cutting fine and right on the money.
I recently moved my shopbot to a new location and once everything was set up, I have tried some test cuts.
The issue is that over a series of cuts, it is losing Z by raising up. Even if it's an...