The issue is that the chuck appears to have changed on newer 890 routers. They don't have enough threads to get more than about a half turn on the nut. If you have an older one it shouldn't be an...
Type: Posts; User: tda
The issue is that the chuck appears to have changed on newer 890 routers. They don't have enough threads to get more than about a half turn on the nut. If you have an older one it shouldn't be an...
We have found the chipbreakers tend to pack and delaminate carbon fiber. The best tool we found for this is diamond-cut router bits. Similar design but the crosscut on them will give you a better...
Currently looking into this. Looks like PayPal. Thanks for the heads up.
Be very careful cleaning any precision ground surface with solvents. The whole reason we developed ColletCare to begin with was because of this. Some of our customers in the steel rule die industry...
Thanks for the kind words everybody.
If you have a FedEx number (anyone can get one) you can get rid of the brokerage by having the taxes and duties charged to your account. It has to be done at...
You shouldn't have any problem with that stuff it cuts pretty easily as long as you don't go too slow. I would only take 1 diameter deep passes as that will give you less deflection and in general...