Search:

To bad you're not closer, I'd be interested in looking at this machine. Good luck with the sale.

Ok, I think I got it. The Value for z with my pinion should be 509.2956.

Ok, from the FB users page one suggestion was;

This solution worked...except I had to re-install the control software (well didn't have to, but thought it prudent to do so)

Now the only thing...

Didn't get rid of the machine, just worked went back to the original board and got it going. Then last year (almost exactly one year) the control board shot craps completely and more or less forced...

I used my PRT standard Monday, everything worked just fine. When I was done and shut the shop down for the day, I turned the control box off. This morning I went to cut a file and I started the...

Hey everyone....Rob is a first rate guy. I bought the 7519 from him for a good price...and he sent pictures that really didn't show what I was really getting..... the router motor, in real life, was...

Well, a new V4g control board fixed the problem. Not a cheap fix, but one I had contemplated over the years about doing anyway. I know they said the new board wouldn't make the machine faster, but...

Ordered a new V4g board from Shopbot

Well, it wasn't the computer They have determined that a V4g upgrade should fix my problem, so I just ordered that from Shopbot. Thank you for your help.

Yea, they quoted me a price. Right now I'm trying to determine where my communication problem lies. If it is the control board, yours would be a way cheaper fix and would probably get me by.

I'm...

Does that control board have a direct USB connection?

Thinking I am going to go with a new V4g board from Shopbot.

Eric, Looks like my V2.06 board in my PRT has gone belly up. What needs to happen in order to make the RBK board work in my box? Very interested!

Well, I guess my V2.06 board (2001 PRT standard) has problems..... Anyone out there have a similar board laying around? Or maybe an entire Control box?

Other options?

Well, I think they have determined that the problem is in the control box. So I guess I need to 1) get the board fixed, 2) upgrade or 3) Find a replacement board.

Thank you Bill, I'll call them tomorrow.

Un-installing and re-installing didn't help. Still the same issue. Looking for more suggestions/help.

Yes it is connected to the Inet. Don't know about any updates. I'll do an uninstall and re-install. Thanks for the help.

Hey guys, been a while since I was on here.....things been working pretty good, until today.

Ran some files last night about 8:30pm, everything was fine. Came out this morning and tried to run a...

Thank you for the help

Hey guys, I'm wanting to add a form tool to my data base. it is a Jesada 648-590 I believe they call it a plunge ogee bit...but not really an ogee as it has a 90* fillet between the radii, and the...

Looks to be a Router in one of the pictures.

Might help if you posted where you are!

Ron, I’m about 3 hours from CS in SW Kansas. I don’t have a new Shopbot, but a PRT machine 9648 that is about 17 years old, but you are more than welcome to come to my shop and see what it is all...

I have had my 7518 router rebuilt by the factory service center....cost me $175 and was like brand new when I got it back. Now I have a backup.