Thanks guys, very helpful.
Mike
Type: Posts; User: Michaelodunk
Thanks guys, very helpful.
Mike
thanks for the answer that is just what I wanted to hear. I do have a 2" inserted cutter so that should work well.
I have tried plywood as a spoil board but found it warped a lot.
Thanks
Mike
Thinking about converting to a spindle and I see a lot of them rated at 2.2kv. The question is can a spindle with that rating run my 2 inch surfacing cutter.
Is there a way to carve multiple parts with different names on them using an input statement. I want to avoid recalculating after every part or recalculate on the fly after the name is input.
...
I have one of the first prs machines. I was having the same problems. The first thing I did was put middle legs under the rails I now have 6 legs instead of 4. The other thing was to replace the...
I was having similar problems, I have one of the first PRS machines I added middle legs to to the rails and it helped a lot to fix the problem.
I have the same question. I am looking forward to some great input.
Thanks
Mike
I'm not sure it there is real Teak in this product but if there is Teak is VERY abrasive.
If you wave a torch over those small bubbles they will go away. It doesn't take much a very brief wave.
Mike
If you don't like to clean the that shellac brush after use just wipe it off to get most of the shellac off and let get hard. Next time you want to use it just stick it in some alcohol and it will...
you can find one on www.puritan.cnc I moding on thified some software that was available somewhere on the shopbot site. It works in a corner but the z height does not work because it is not sitting...
I use T nuts which you insert for the back. Find them on the internet or Amazon has them.
beware of plywood it is not flat and and real ugly when you try to surface it.
29268
I have a similar vintage bot and had the same problem. I had to replace the gecko drives that are in the computer. The gecko people are great they will test your drives free.
Hi everyone
My brother and I share a web site it started out as selling aluminum templates that cut mortises in stiles for making louvered shutters it has progressed well enough that we are...
I installed it, I had a few initial problems. Follow the directions.There are some good instructions on the net on how to kill a lot of things that suck up a lot of power and cpu
I recently upgraded my planner to an inserted cutter and I have the old cutter head. I was wondering if anyone has any ideas what to do with it.
Thanks
Mike27587
WOW nobody does this! No wonder I was having trouble figuring it out.
What is the best way to convert this picture to a file that I can 3D carve on my shopbot.
I currently have vcarve pro.
Thanks Mike
26955
IBM sold their laptop computers to lenovo a chinese manufacture.
It sounds like you have a powerful computer why a new one?
If you are still having a problem try disconnecting the x y sensors if they go bad the machine does weird things. It worked on my machine.
Good Luck
Mike
If you have a lot of pvc to bend this looks like the way to go.
pvcbendit.com
Try WORD very powerful.
Check this out.
http://www.talkshopbot.com/forum/showthread.php?17279-Tree-Chair
That is pretty cool. I'll bet you could do pretty interesting things with bamboo.
this is a slice off a mesquite log I didn't notice the lizzard at first when I did I bought him a nice glass eye
25360