Search:

if this was your first time and it worked.. then good for you... if you were going to do a hundred of those pieces then you might want to rethink the speed etc... but for a one off all you want is...

the only downside to the wireless keyboard is when you lose the receiver... as I have done.. then no mouse and no keyboard.. with the newer logitech they have a unified receiver that will work for...

I was using the logitech MX5000.. this one is actually a bluetooth device and as such I could go a few houses down the street and still connect.. I tried the mouse at about 50 feet and it still...

a number #30 drill is .1285


you might want to try that

the latest issue of fine woodworking has a feature on dust collecting and cyclones.. its worth a look before you spend a pile of money on something new.. issue 223

even if you don't buy one here.. http://www.clearvuecyclones.com/ its got lots of info ...

G'day Dana

any chance of a picture of what you did..

thanks

the casters are about $300.. so I appreciate hearing from you guys...

Can anyone tell me what is included with the caster kit.. I saw mention in another post that someone that got the kit wished they has just made their own.. is it just a set of wheels??


thanks
...

thanks Bob

did you happen to notice if the slotted table could be removed..

finally ... someone with the desktop... how is it working out... I had a prs alpha and only found I was using a few inches of the table... so I'm looking at getting a desktop.
Any problems?? did...

Is there anyone on the forum that has a desktop machine??

you can smooth 3d models in Zbrush..

I was trying to figure out if there is a spindle RPM controller available for the desktop.. all the new bots that have a spindle come with one.. but there is not mention on the site or in the price...

does anyone know if the spindle for the desktop can be controlled from your pc

mitch

Al

what you may find is your dust collection will end up being louder than a spindle.. so if you are running the collector the whole time you are doing 3d, you may not be any better off ... you...

Mike

you would be better off to get the 2.2 hp and spend the difference in money on bits... if you have not cut aluminum before.. you will certainly need a few extra when you get started... and...

we all get injuries at one time or another... and then for the most part we forget how it happened and just carry on till the next time...

this post is a great reminder.. I am sure I am not the...

just got a note from the gentleman that bought my PRS Alpha.....

it appears his electrician swapped the 220 and the 110 on the control box...

any thoughts as to how bad this might be.. ??
...

we also closed on our house on the same day ... not as big a shop... and no pond ...yet

m

sorry bout getting the heart rate up... I know what that is like for us old fellas... but most ppl don't know the difference and I just wanted to get the message across..

if you follow the thingverse link.. you will find the thing-o-matic ... its home based stereo lithography at a price that most could live with....

m

I know where you could get some scrollsaw patterns that would work for the tree.. send me a pm

mitch

and I found this.. a few nice garages...

http://www.fordgtforum.com/forums/showthread.php?17919-The-Uncluttered-Ultimate-Garage-Thread

came across this .. might be interesting for anyone looking to make gears..

http://gearotic.com/index.html

you can try out the demo... the cost is not as high as getting some of the other...