Hallo again.
I installed NC proximity switces. To work both I put one on input 3, and аnother on input 5.
Seems they work properly. The original proximity switches, however, were NO so now I...
Type: Posts; User: kamen
Hallo again.
I installed NC proximity switces. To work both I put one on input 3, and аnother on input 5.
Seems they work properly. The original proximity switches, however, were NO so now I...
Thanks Eric
I'd better find the same sensor but normally closed.
Writing from Europe and local stores are my preferred choice.
Regards
Hi
I broke the proximity switch of my old PRT alpha.
Find this one on local store.
TL-Q5MC1 DC 10-36V 50mA NPN Inductive Proximity Switch Sensor 5mm Detection Normally Open NO 12V 24V
My...
Hi
I have Shopbot PRT Alpha 96.
Need to change one proximity Switch.
Is this one suitable:
NPN -NC 10-30 VDC
max output current 80mA
Hi
I have PRT Alpha And I have the next problem.
1. Set Z Zero of the top of the template (30mm MDF Boadr)
2. Jog router outside the template and jog Z=-30mm.
3. Mark the template with this...
Hi again
I change my IO gear USB to Serial with one made from Gembird. Company operates only in Europe.
instal path is same as IO gear adapter.
The problem is solved. And for now my PRT Alpha...
Hi Scott
Unfortunately i have ths same problem.
I'm not shure about circuit shortage but I can't make connection with control box.
My questions
What is d-ring on adapter?
Is old IO gear...
Hi
Here is the example of vector I need to cut.
If its possible I prefer to use software product for toolpath generation.
I modify every Artcam program for minimazing air cuts, but I'm not...
Hi
I'm useing Artcam pro 8, mostly for relief cutting
It works fine for releafs, but i need to cut along single 3d vector.
Artcam cuts Area Under selected vectors, not single vector.
...
Hi
Is it posible to generate toolpath over 3d vector, with some CAM soft, with SB postprocessor?
Instaled SB version 3.4.27 and have next problems:
During file cutting z axis moves approx -20mm without interrupting cutting process.
The problem is not in the file since I cut the same one...
I need some fine European cutters mostly for MDF.
Is anybody use LEUCO carbid cutters?
I find many US tools in this forum, but none from Europe.
Can anybody help?
Thanks in advance
Here's the situation.
As my Shop is not finish yet I started the ShopBot with the same old computer with win98. It's not the best but it,s worked. When first hit limit swich problems accurred I...
Hi again
Now I have another problem.
When I swich my spindell on in
Control Box Prooblem window appears mesage
No Return Value Timer Over-run
I tryed to run my ShopBot on Win98
Is...
Thanks guys
Grounding the dust collector seems to solve the problem.
I check ground of my system and I see that it's very well grounded, from the spindel to the USB cable,
so I remove...
HAllo
Work on my PRTalpha from several days and have the next problem.
During cutting process Sb stops and Limit Swich Hit message appears,
My files are .dwg. I import 'em in Part Wizard and...
Hi Bill.
Not yet, but uoy can check the web from time to time.
We are in negotiations with some big companys but I'm the designer and I am not very involved in this.
In fact from now we have...
Hi Everybody
My question is how can I set toolpath cutting order in Part Wizard 2.
Here is the case:
I work with many similar objects imported from AutoCad. When I calculate toolpath, the...
Hi Gerald,
Hi Mike.
Sory for the deklay.
It was surprise for me how complicate one inverter can be.
All 3-phase wiring was made from licensed electician (my father)
and everything is...
Hi
I use 3 phase COLOMBO spindel RS 73/2FP1CPE25, and inverter BERGES ACM 1K40030H.
If Somebody use BERGES too, I have some questions:
The PRT Alpha just closes 2 wire swich to send...
I have Colombo spindle and BERGES ACM D2/S2 VF controller.
The instructions in wiring chapter applies only to Delta Electronics VFD.
So if somebody have technical information about this case, it...
It works nice with vodka too, but accurasy drop drasticaly.
Hi everybody
I use at about 6 meters ov transparent hose and 2 garden T-joints to construct simple water leveler.
It cost me at about 3$ and make all process much easyer.
I level the table...
Hi Gerald
The table is ready for painting
I plan to bolt all the parts together without welding at all
I'll send you a picture when I'm ready
Kamen
Hi Gerald,
Hi Mike.
Some hours later ...
Welding is not good for me.
I talked with some guys near to my workshop, because I cant weld the legs by myself. And when I start to talk about...