I have used a 1/32" ballnose on my final pass with 12 spacing.
attached in is an image showing the tool marks. Is the only way to smooth this out by decreasing my spacing which significantly...
Type: Posts; User: Scotcat2
I have used a 1/32" ballnose on my final pass with 12 spacing.
attached in is an image showing the tool marks. Is the only way to smooth this out by decreasing my spacing which significantly...
I am trying to get a super smooth finish with no raster.
My finishing pass I use a 1/32” ball nose with a 12 spacing, I also increase depth .025 between rough, semi , and finishing pass.
I’m...
Thanks, I’ll try the suggestions.
I am using photo V carve. I can get a pretty smooth image using a 1/8” ball nose, at 50%, no cross hatching at .095; then 1/16” at 25% at .1.
Both of these at a 45 degree. I’m still getting some...