I recently upgraded from an old PRT (serial port old) to the new RBK control system. I have noticed that machine does not cut as smoothly as it use to cut.
I had to adjust the drivers for the...
Type: Posts; User: asemcollc
I recently upgraded from an old PRT (serial port old) to the new RBK control system. I have noticed that machine does not cut as smoothly as it use to cut.
I had to adjust the drivers for the...
Thank you. I have everything up and running again now.
Found it THANK YOU.
The mother board on my computer crashed. I program in Aspire and had all my files backed-up except for two which had been created in the Shopbot software. 1) the routine to surface the spoil board...
I disengaged the two X motors and swapped the lines at the control box. Then X2 was working and X1 was not so I knew the motor and lines were fine. The issue had to be in the control box. I started...
While cutting some letters today I noticed what I call "Chatter"on the edge of a few letters. I know this tends to happen when something is lose that should be tight. After trouble trouble shooting...
Do any of you use your machines to cut both metal (steel; very thin .07") and wood? To this point I have only cut wood. I have an opportunity to cut some metal products. What should I be concerned...
Great looking design. Please let us know how it works after you have used it for a while.
Would you please share the specifics on the strip brush from McMaster you used? How was it to work with?
Dana and Tim,
Thanks for your replies. After triple checking ground connections, hundreds of Google searches, dozens of emails, and hours on the phone with the Shop Bot tech team (Thanks Frank for...
I am having trouble zeroing my Z axis. When the bit touches the zero plate during the z zeroing routine the router does not stop. It continues to plunge.
The really odd thing is that the...