These are a few shots from a Reception Area for a Medical Office that we recently completed. All the work shown was framed, patterned, or cut directly on the Shop-bot. For the Ceiling panels we supplied the framers and drwall crew with a pattern up front for them to work from. For the desk all the verticle and horizontal frames in the desk as well as the pattern for the stone top and the glass transaction ledge are SB parts, and the intake desk dividers and curved soffits above were patterned on the bot. All started out as DXF files imported into AC Pro for toolpathing.
40781.jpg
40782.jpg
40783.jpg
The veneer is quarter cut cherry and all substrate, adhesives, etc are Formaldehyde-free and from plantation grown trees. Don't ever let anyone tell you commercial work is boring!!!