Good going boys,
I'm not sure Styrospray can be sprayed with normal equipment. They told me to use a Wagner sprayer. After I bought one and it didn't work then they told me the NEW Wagner, which I bought, won't work. That was a $50 loss.
If I may, I'd suggest using epoxy. It dry's much harder and sticks much better. Be careful with Styrospray on blue and pink foam. They suggest sanding it down first. It's made to work on white beadboard. Pleasecall them to get the info on blue and pink foams before you get too far down the road. Another advantage to epoxy it doesn't loose fine detail.the detail and you can get it anywhere.
Here's my assistant, Ron, laughing as Styrospray falls off the sign. This stuff is very low on my recommendation list.
Joe
Reply With Quote
