Thermwood Dovetail Bits Users

[sailfl]

If you are or have used Thermwood's Dovetail Bits with your machine to cut dovetail joints, I would like the opportunity to speak with you by phone.

Would you please PM me with your phone number.

Thanks

[englert]

If you haven't already done so, you might try going to the forum for Thermwood and eCabinet Systems. www.Thermwood.com. Go to the bottom of the web page and click on "Forums". I'm not sure about the ShopBot'rs, but there are quite a few Thermwood owners using the bit and can probably help you with any setup questions.

Dennis L. Englert