CNC chair

[phil_o]

I was in San Francisco recently and went to the Museum of Modern Art. Most of it was not to my liking but I saw a chair that had to be a CNC project. I thought I'd share a couple of pictures.

[fabrun]

give me some rough dimension and i will make the plan

[phil_o]

I can see by your website that you have the ability. I didn't measure the chair when I was at the museum so the dimensions I am presenting here are based on chairs I measured at home. Obviously you can make adjustments as you are creating the plan.
The overall diameter of the circle is approximately 30 - 32 inches, height to seat is 16 inches, height to top of back is 30 - 32 inches.

[fabrun]

and for sheet thickness?

[jsooter]

I would like the plans as well if you make them

[fabrun]

it is in my to do list
let me 2 or 3 days
it will be at low price

[phil_o]

A material thickness of 1/2" should be fine.

[mikeacg]

I'd be very interested as well! Thanks for jumping in here!!

[fabrun]

the start
before slicing

let me know what you think
thanks

[jsooter]

Great Job!