CNC chair

[eric_schumacher]

Looks pretty good! Not exact, but pretty close.

[fabrun]

i tried to change the design a little bit

people interested can email me (email on my website)

[nepenthes]

Made the chair 1/3 scale for my wife's dolls. Made from 1/4" cintra.

[jsooter]

Great Job! Is that really 1/3rd scale? That must be a really big doll..haha

[nepenthes]

Yup. 1/3 scale. They are about 22" tall.

[kra]

looks like the chair needs more curve in the bottom of the seat to be usable/comfortable but very cool design

[phil_o]

Very nice Randy. Was it easy to assemble, there are a lot of interlocking parts.

Phil

[nepenthes]

The hardest part was keeping the parts straight. Too many pieces that all look the same. Assemble was a piece of cake. I think on a full sized chair you would want to glue the parts together, but who cares if a doll falls on its butt.

[eric_schumacher]

http://inhabitat.com/metropol-paraso...ns-in-seville/


I came across this article and it reminded me of this chair. Pretty cool.

[fabrun]

does someone whant the plan for that ?