Bad Rocker Switch

[jimboy]

PRS Buddy with computer case control. I have a bad on/off switch on the front of the case. I have a replacement, but how do you remove the plastic front to get at the base of the switch? I have a email into ShopBot, but haven't heard back yet and I need to use the machine. Thanks

[Brady Watson]

There are tangs/tabs on the back side of the front cover that hold it to the ATX chassis. There may or may not be screws that have to be removed depending on the brand of case.

You need to remove both SIDE covers to access the tabs. Push them out a little starting at the top of the case and 'unzip' it working your way down. It should come off pretty easily.

-B

[Brady Watson]

Here's an example of the tangs/tabs on the ATX case:



-B

[jimboy]

Thanks Brady, I give it a try. I was only working from the left side. Also I think there are screws at least on one side. Thanks again.