Don't use Off Falls in SBLink - BIG BUG

[dlcw]

I found out the expensive way today that SBLink has a big bug when it comes to Off Falls. I first clued in on it when I printed my sheet layouts for a cabinet job and the Off Falls overlaid the parts on the sheet (photo attached). Talked to TWD support and they were able to duplicate this problem, so it's logged. So they suggested that for printing purposes I turn Off Falls option off and print the layout sheets. Then I can turn Off Falls them back on, renest and cut the job. The results of that operation are shown in the other other photograph.

Overall result - ruined a $50 sheet of baltic birch and lost half a day. Now I have to finish another sheet of baltic birch and try cutting it again.

Don't use Off Falls until they get this fixed.