My son sent me this design idea. I thought I would share the cool picture. What an easy assembly.
34465.jpg
My son sent me this design idea. I thought I would share the cool picture. What an easy assembly.
34465.jpg
very cool more of a puzzle then anything else. not sure what you would do with it after you made it.
It's a paint can closer.
OK say this three times quickly - it's called a
ShopBot Nut Knocker, ShopBot Nut Knocker, ShopBot Nut Knocker!
Russ
ok...where do we get plans, cut file, etc
You could use that to fight off the dino puzzles!
Or as a nutcracker in the nut bowl.
You guys crack me up. Yes, the shopbot has plenty of nuts to knock and plenty of nuts here too.
The dinos oh boy, I have 6 more to make and everyone that see one wants two.....
G Smith - I just noticed something in the pix that I don't recall seeing before. It looks like the ends of the tab insertion slots have little tee's. Did you use a very small bit and by creating those tee's you end up with a square end for the tab? Russ
And at $40.00 each they are making the right kind of money off them!!
Russ, Sorry if you thought I made this. I have not yet. Mine may be bigger though.
My son passed on the picture to me as he is taking a cad/cam class at college and the class was studying the design.
His class assignment is to come up with a creative item too. He wanted to share the assignment and thus I wanted to pass on an exceptional example of work to the community here.