Results 1 to 4 of 4

Thread: Questions re: longer powerstick

  1. #1
    Join Date
    Apr 2011
    Location
    Cincinnati
    Posts
    119

    Default Questions re: longer powerstick

    I'm going to purchase a 8' powerstick to increase my cutting area (yeah should have just bought a regular bot in the first place - too late now ) anyone using this size powerstick? Do I need to add additional support/weight to the base of my buddy to help it cope when the table is at the end of it's travel? Any issues with the powerstick bending/warping over time?

  2. #2
    Join Date
    Apr 2011
    Location
    Amber, NY
    Posts
    556

    Default

    Not using a buddy but they require an additional in and out feed support. Don't quote me, but i believe it's an extra $395. Go check the current price list.

    Regards
    Randy

  3. #3
    Join Date
    Apr 2011
    Location
    Finland
    Posts
    16

    Thumbs down

    Hi Brian, sorry about the late reply. I have 8 ft power stick attache to my Buddy. It works just fine, but it will (in my opinion) need the additional support rails on both ends of the Buddy.

    I had to spend some extra time to vertically adjust the support rails to the same level with the rollers on Buddy frame. Also check carefully, that Your Power stick upper surface will be at the same level with the rollers so that they will all make a straight surface. After surfacing, the final result will be just as good as with the smaller stick.

    Regards,
    Antti

  4. #4
    Join Date
    Apr 2011
    Location
    Cincinnati
    Posts
    119

    Default

    appreciate the replies I have the long stick now but have not used it yet as my shop needs to be rearranged to allow for the longer work surface. I think the buddy is great but if I had it to do over again I'd have bought a larger shopbot.

Similar Threads

  1. powerstick modification questions
    By Steve Howden in forum ShopBot Buddy
    Replies: 5
    Last Post: 04-15-2011, 02:08 PM
  2. Maybe not Longer
    By angus_hines in forum ShopBotter Message Board
    Replies: 5
    Last Post: 02-03-2009, 01:11 PM
  3. I'm no longer a Virgin!!
    By myxpykalix in forum Archives2006
    Replies: 1
    Last Post: 09-27-2006, 04:55 PM
  4. No longer a 'Wannabe'
    By robinsoncr@naxs.net in forum Archives 2003
    Replies: 22
    Last Post: 05-12-2003, 09:49 AM
  5. Longer collet?
    By greg@germanguitars.com in forum Archives thru 2002
    Replies: 2
    Last Post: 11-19-2001, 03:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •