mechanical iris with cut files

[myxpykalix]

http://www.instructables.com/id/mechanical-iris-1/

[gc3]

Nice link, Thanks!

[CNYDWW]

Thanks Jack but the dwg file isn't complete with all the parts

[myxpykalix]

randy i believe if u look at objects on left the parts are contained within that outside ring part and will have to cut them out with different toolpaths.

i haven't cut them out myself tho.
looks to me like u cut the outside ring with handle which attaches to the part on the right.

then the small parts in the center attach to the part on the right.