is the 740 oz NEMA 34 High Definition Stepper Motors
more like a standard shopbot motor or a alpha.
I am looking at making a stand alone indexer.
any help would be great
thanks larry
Larry,
I have been considering converting a Vega wood lathe (has 2 axis duplicator).
A metal working lathe might work - don't 're-invent-the -wheel' any more than you have to. SB tech said they would sell the motor - but not offer tech support on it. Let me know how you do.
Jeff Smith
630-365-9488
Here is a couple different pics of my steppers and indexer motor. I can't tell you the specific technical differences but you can look them up for reference. The indexer motor has an additional section on it, i suspect for more gearing.
These are from a 2006 Prt Alpha
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson