Results 1 to 6 of 6

Thread: oddity

  1. #1
    Join Date
    Sep 2011
    Location
    New Hampshire
    Posts
    82

    Default oddity

    I just got the link up and running. It is cutting good parts, the issue I have is the table surfacer tool keeps popping up when I load a link file. At the the end of the job I have half a dozen surfacer windows open. It does not seem to be causing an issue, it just seems odd to me. Has this happened to anyone else?

  2. #2
    Join Date
    Feb 2004
    Location
    Rogers, Arkansas
    Posts
    1,010

    Default

    Have you got the table surfacer set up as a custom cut?
    Ken Zey
    Lookout Mercantile / Digital Millwork
    Rogers, AR
    www.CedarSlabSigns.com
    www.lookoutmercantile.com
    www.digitalmillwork.com

    6x12 PRS alpha

  3. #3
    garyc Guest

    Default

    Todd...

    Have you made anu entries to the header or footer entry areas? If so check them and make sure that there is nothing that resemble "TU"
    If not, can you send me an export of the last file that did this?
    1) Load job
    2) Press export button in lower right of main screen
    3) email to gary.campbell (at) shopbottools (dot) com

    There should be no TU commands output from the link.

  4. #4
    Join Date
    Sep 2011
    Location
    New Hampshire
    Posts
    82

    Default TU

    Gary,

    The only thing I can find with a Tu is the " turn on dust collector and turn on vac in the header

    would the tu in turn cause it?

    Thanks for the help
    BTW ecabinets and the link are awesome, the machining is great even on a prt.

  5. #5
    garyc Guest

    Default

    if there is not an apostrophe in front of it ( ' )

  6. #6
    Join Date
    Sep 2011
    Location
    New Hampshire
    Posts
    82

    Default thats it

    Thanks Gary that's it no '

Similar Threads

  1. SBLink (metric) plunge speed oddity
    By dkrage in forum Cabinetry and eCabinet/ShopBot Link
    Replies: 1
    Last Post: 01-09-2012, 07:28 PM
  2. Probing Oddity? Help-What's going on?
    By jim_stadtlander in forum Archives2008
    Replies: 8
    Last Post: 03-23-2008, 10:46 AM
  3. V Carve Pro Trial Text Selection Oddity
    By kfitz in forum VCarvePro and PhotoVCarve
    Replies: 3
    Last Post: 11-13-2007, 06:19 PM
  4. CR command oddity
    By mikejohn in forum Archives 2005
    Replies: 11
    Last Post: 10-23-2005, 01:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •