Experienced Shopbot CNC Operator Needed Lafayette, CO

[PeteAverson]

Experienced Shopbot CNC Operator Needed ASAP; $20 per hour + depending on EXPERIENCE!

Lafayette, CO
Call 303 895 5263
Email: pete.averson@boulderev.com

[shoeshine]

Hi Pete,

Not to rain on the parade, but an experienced CNC fabricator costs a whole lot more than $20/hr. If you just need a button pusher, you might think about training one up yourself. Most "experienced botter's" shop rates run the gamut from $60 - $150/hr. An employee, where you cover all overhead and perhaps offer benefits would be less, but you might need to re-think that range.

all the best
Chris