Aloha!
Well the day has finally come, we received our crates here in Hawai'i and unpacked them yesterday, so the big day of Assembly is here!
I have spent the past couple of days reading through the assembly manual and forums and feel that everything is fairly straight forward so far (although I have not started tha actual assembly yet!)
I am one of those guys that have been making wood chips and dust for the past 30 years, but have also been using mostly all hand tools, so the "machinery, electrical, assembly stuff is not in my normal bag.
My first question seems very elementary, but I do not seem to be able to find a good answer, so here goes:
1. I will not be hooking up a vacuum hold down system at this time (or possibly ever) So when it comes to my "table surface" what should I be using? and How much of it?
We live in Hawai'i and have a constant higher humidity level, not really much swing at all.
2. I was originally thinking 3/4'' Birch ply, but finding conflicting answers on how much? 2 sheets? 3 sheets?
3. First sheet bolted to the frame and the second (third) glued?
I appreciated all the posts on here, and am very appreciative in advance of any assistance.
Mahalo, Chris