I just updated a few weeks ago from Aspire 2.5 to 3.5. I use dual monitors (side by side) and I always split my screens vertically. Left monitor shows 2D drawing view and the right monitor shows the 3D view. When I had 2.5, I set this up so that the 2D view was totally inside the left monitor viewing area and the 3D view was totally in the right monitor viewing area. With 2.5, once I did this the first time, it seemed to remember these view settings and the split screen was just how I wanted it every time. Now, with 3.5, Aspire opens up with only the 2D view stretched across both screens. Then when I click to tile vertically, the 2D view is still about a 1/4 in the right screen, so I have to resize it with my mouse. This happens every single time I open Aspire with either a new or old file.
This is a minor inconvenience, but I would like to not have to do this every time. Is there a new setting somewhere that makes Aspire remember the views?