Results 1 to 10 of 10

Thread: Before it all ends

  1. #1
    Join Date
    Nov 2011
    Location
    Mission B.C.
    Posts
    122

    Default Before it all ends

    Thought I should try one before it all ends!!
    3/4" mdf
    17" diameter
    60 degree bit
    9 hours to route!!!
    Attached Images Attached Images

  2. #2
    Join Date
    Mar 2006
    Posts
    7,830

    Default

    What is the finish? To my eye it almost looks like metal? It looks great
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

  3. #3
    Join Date
    Nov 2011
    Location
    Mission B.C.
    Posts
    122

    Default

    Jack,

    It is just rattle can black (satin) with a matt clear coat.

    Rik

  4. #4
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    828

    Default

    Better get it done quick - weather forecast is not good.
    Attached Images Attached Images

  5. #5
    Join Date
    Nov 2007
    Location
    NovaScotia
    Posts
    275

    Default

    Very cool Rick.
    Don't worry Phill, Sat. looks clear!

  6. #6
    Join Date
    Jan 2010
    Location
    , Cape May NJ
    Posts
    299

    Default

    Coolness! Love the finish as well.

  7. #7
    Join Date
    Jan 2004
    Location
    iBILD Solutions - Southern NJ
    Posts
    7,952

    Default

    Looks great! Love the finish.

    FYI - In case you didn't know: Aztec Sun Stone vs. Mayan Calandar

    -B
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com

  8. #8
    Join Date
    Nov 2011
    Location
    Mission B.C.
    Posts
    122

    Default

    So Brady, you're telling me that I had more time??????

    I didn't have to rush???

    Thanks

    Rik

  9. #9
    Join Date
    Nov 2011
    Location
    Mission B.C.
    Posts
    122

    Default

    By the way, nice weather forecast Phil!!!

    Rik

  10. #10
    Join Date
    Mar 2004
    Location
    RC CNC, Roberts Creek BC
    Posts
    271

    Default

    I was going to burn the one I made at our end of days party.
    Anyone come up with a new calandar yet!

    Brian

Similar Threads

  1. Need advice on cutting sharp corners/ends
    By awalt1250 in forum ShopBotter Message Board
    Replies: 5
    Last Post: 05-13-2014, 08:10 AM
  2. Tech support on week ends
    By wberminio in forum ShopBotter Message Board
    Replies: 10
    Last Post: 11-23-2013, 10:03 PM
  3. Turning off a standard & spindle when file ends
    By dubliner in forum Archives2008
    Replies: 3
    Last Post: 12-12-2008, 10:09 PM
  4. Ends for wood curtain rods
    By johntwo in forum Archives2006
    Replies: 4
    Last Post: 11-21-2006, 07:37 PM
  5. Win98 Support ends July 11, 2006
    By paul_n in forum Archives2006
    Replies: 0
    Last Post: 07-02-2006, 06:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •