Spoilboard levelling bit

[Coogara]

Terrific feedback - I've been told what great support the ShopBot community provides - much appreciated by this complete CNC novice.

[JackM]

Graeme,

If you go to this address, http://www.shopbottools.com/mProducts/store.htm

And select Cutters ......you will find the contents of the Desktop starter kit.

It's different to the PRS starter kit which includes a 1 1/4" planer bit......although I have now a 2 1/2" one.

The desktop is not a large deck so maybe the included 1/2" straight bit included in the desktop starter kit is sufficient???

Cheers

That link just made my day!! I searched high and low for the bit descriptions that came with my new Desktop. Now I can figure out one more piece of the puzzle.

!

[Max Girouard]

I use this one.....

http://www.amazon.com/Whiteside-WS13...+bit+whiteside

Makes quick work of surfacing the small desktop spoil board, is inexpensive and made in the US. I've used it to surface both hardwood and softwood plywood and mdf spoil boards about a dozen times each and there is still plenty of life left in it.