Can you post some photos of your shop interior ? i am curious on what type of equipment others have besides the bots.
Can you post some photos of your shop interior ? i am curious on what type of equipment others have besides the bots.
Gene,
I did post pics before but let me dig up a few...
In the mean time this is a list of my equipment:
- 10", 5HP Sawstop table saw
- 14", 7.5 HP Griggio sliding panel saw (with Tigerfence)
- 20" HD Cantek Planer
- 16" HD Cantek Jointer
- tilting arbor Cantek 7.5 HP spindle shaper
- 38" wide Cantek wide belt sander (single head/ dual drum with platen)
- 108 by 6" Progress edge sander
- 8' stroke sander (Progress)
- 14" Omga radial arm saw with 28" stroke
- 10HP Ingersall Rand compressor
- General 16x48 wood lathe
- Urpematic 12 by 52 hydraulic copy lathe
- Laguna 16"HD bad saw with 5HP motor
- Concord 22 or 24" bandsaw (forget the size)
- General oscillating spindle sander
- old rockwell uniplane
- Belfab 7.5HP dust collector with Oneida cyclone
As well, I have a 12 foot spray booth, and two complete Graco 2.5 gallon pressure pot systems I use for spraying clear, and cloured catalyzed lacquers.
I also have a whole lot of hand tools, both powered (routers, sanders, etc) and hand tools (a lot of planes, saws, spokeshaves, etc). And clamps, etc all the usual woodworkign shop stuff.
I also have two small vertical mills and a metal lathe, surface grinder, welders and torches, etc to do small metal jobs and also maintenance.
Last edited by Ajcoholic; 01-14-2013 at 08:37 PM.
Does that give you a good enough idea of my shop?
All my material storage is on the opposite side of the working shop. I have a 6000 sq foot shop, but the working shop is 3200, the rest is storage.
AJC
Wow! I really like the new chair. Very high end. Very designer. Very nice!
Amazing shop you have. Endless equipment.
I assume that this is your full time career , Woodworking ? I can tell a lot of planning went into your shop setup, Looks Great! ( cause i cant spell fabulious ! )
Definately FIRST CLASS ALL THE WAY!
So Andrew is that where all the magic happens? Very nice...
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Andrew - First off, beautiful chair. Thanks for posting all this.
One question that I had was on the chair seat bottom. I have had a few people ask me about carving chair seats in the past. They have always turned their nose up when I gave them a price. I assume that you did a 3D model in Aspire for the seat bottom. What is your run time on just the seat bottom? What size endmill and feed rate did you use?
Thanks