The auto parts guy wanted me to bring the filter cartridge cap to him so he could sell me the right size. Cut this on the bot instead. Made from scrap Starboard. To much time on my hands.
Member
oil filter wrench
The auto parts guy wanted me to bring the filter cartridge cap to him so he could sell me the right size. Cut this on the bot instead. Made from scrap Starboard. To much time on my hands.
Senior Member
That works better than the one you would have bought from the auto parts store.
Senior Member
How did you figure out such a good fit?
Senior Member
Is that what they call good ol' Yankee Ingenuity?
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Senior Member
that really cool. hope you don't mind if I take your idea.
thank
Member
I used this to get the rough dimensions. I find it indispensable when using the bot. I did 3 off sets and cut outs till it fit tight. I take my waste oil to a local car repair guy who has an oil burning furnace to heat his shop in the winter.
Posting Permissions
Reply With Quote