Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 59

Thread: Fallen warrior

  1. #41
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,038

    Default

    Kyle, good thread. like 80 and 120G bristle discs with a VS flexshaft , but dremel is ok.http://www.talkshopbot.com/forum/sho...radial+bristle
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  2. #42
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,038

    Default

    Oops, insufficient caffeine, But best advice I ever got for fuzzies from forum was to run finish pass twice(Cut full depth and you can go quite a bit faster because you're just skimming it). Helps a LOT but you've already got it off machine.
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  3. #43
    Join Date
    Feb 2010
    Location
    SOUTH CENTRAL COLORADO
    Posts
    1,111

    Default

    Another one going about to a viet nam era marine.
    Attached Images Attached Images

  4. #44
    Join Date
    Mar 2006
    Posts
    7,828

    Default

    The finish on that is absolutely fantastic........excellent work!
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

  5. #45
    Join Date
    Feb 2010
    Location
    SOUTH CENTRAL COLORADO
    Posts
    1,111

    Default

    tanks, but i still have much to learn about finishing.

  6. #46
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,038

    Default

    Another Excellent one Rick!
    Stain on the letters and rope border? Or just end grain sucking it up?
    scott
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  7. #47
    Join Date
    Feb 2010
    Location
    SOUTH CENTRAL COLORADO
    Posts
    1,111

    Default

    Gel stain in the letters and rope. When i wipe the excess off i left a little too much on the top. So i sanded it with 400 grit until i liked the color and added one more seal coat. thanks.

  8. #48
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,038

    Default

    Thanks Rick.
    Just played with my first colored Linseed Butter yesterday, by putting Padauk scraps in denatured and then adding the tincture in and boiling off the denatured.
    Jury is out as until the Moose gets some sun...it'll be Salmon colored, but at least it's transparent and you can see the Quilted grain
    I'm still playing with gels and stink at it.
    Keep up the good work.
    scott
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  9. #49
    Join Date
    Dec 2015
    Location
    Austin, TX
    Posts
    3

    Default

    Great files on that site!!!

  10. #50
    Join Date
    Mar 2006
    Posts
    7,828

    Default

    Quote Originally Posted by selphb View Post
    Great files on that site!!!
    What site?
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

Similar Threads

  1. Flag Raising & Fallen Memorial Test Sample
    By don in forum Folder 2011
    Replies: 5
    Last Post: 05-23-2011, 10:25 PM
  2. Warrior on Horseback
    By rcnewcomb in forum Folder 2009
    Replies: 12
    Last Post: 07-08-2009, 11:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •