Member
3D HDU sign
I don't post much on the forum, don't really have the time but this morning I was reading about some hdu stuff on here and thought I would post and show some of my sign work. This is a hdu sign that we did recently for a local church. I think it turned out very nice. It's 1-1/2 dhu with a 1/2 mdo backer board. Thanks Rick
Last edited by kg4mon; 01-29-2013 at 11:09 AM.
Senior Member
Rick that looks great. What was the machining time for that sign? What density foam did you use? What adhesive did you use to attach the MDO?
Member
It's 15lb density and I used gorilla glue for gluing to backer board. Cutting time for the sign was around 10-12 hours and the eagle was 4 hours.
Member
Here is a few more signs that I've done over the last couple of years.
Member
Here is a few more.
Senior Member
Rick,
The finishing on your signs is exceptional ! Nice work !
"Share your knowledge. It is a way to achieve immortality"...The Dalai Lama
"Nothing is really work unless you would rather be doing something else....." Sir James Barrie
Senior Member
They all look GREAT ! my favorite is the school sign. How thick is it and did you use aspire to cut it ?
Senior Member
shame on you!for not showing this before...beautiful stuff
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Senior Member
Rick, your designs are gorgeous...and am going to remeber your name!!!
Member
Thanks for the kind words. The school sign is a total of 4 layers of 1-1/2 sign foam. I used artcam for the reliefs.
Posting Permissions
Reply With Quote