Anybody have any Ideas where to get a headstock spur center thats fits?
Anybody have any Ideas where to get a headstock spur center thats fits?
Penn State Industries, Grizzly, Packard Woodworks - take your pick. MT sizes & 'chuckable' ones.
-B
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com
Thanks Brady, just found the Penn state one.
I would think you would be better off with some type of positive clamping like the jaws of a chuck rather then just the force of the spurs into the material. I think the chance for slipping is greater.
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
A steb center is better than a spur center...but if you have to get a spur center, a 2-prong will grip better than a 4-prong. I always use a steb on the head & tail.
-B
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com
Thats what I'm looking for, a Steb Center. But it has to be as short as possible because of the buddys table. unless I use the 6' stick.
Just ordered it Brady, Thanks for the help.
OK good - They are way better than a regular drive spur. You can also get a revolving one with bearing for the tailstock, which really helps to reduce splitting.
-B
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com