Guest room signs

[Brian Harnett]

Made these up yesterday for a log cabin these people have been steady customers for years.

They wanted two door signs for the guest rooms the signs are red oak the texturing was done by hand with a die grinder and a flame shape carbide bit it takes about two minutes a sign to do it by hand.

Then burned with a torch sanded sealed misted with gray primer sealed again.

The fishing pole is a dowel and a piece of brazing rod with wire for the eyelets and line.

[genek]

Very nice like the fishing pole.. But what did you do for the real.. And what did you do with the fish...

You always have nice signs... Thanks

[Brian Harnett]

The reel was a 1/2 inch dowel slice its actually suposed to be a fly on the end, I just bent the wire and dabbed epoxy on it.

[myxpykalix]

Very cool Brian